Vishwakarma Electric Industries
Vatva, GIDC, Ahmedabad, Gujarat
Send E-mail
Send SMS
Home»Products We Offer»

Electrical Panels

Our range of products include Electrical Panels such as Electrical Assembly Panels, Low Tension Panels, Motor Control Center Panels, Auto Transformer Starter Panels, Change Over Electrical Panels and Power Control Center Panels.




REQUEST CALLBACK
Approx. Rs 20,000 / Set
Get Best Quote
Product Details:
PowerVoltage: 660 V
Motor Control Centers Panels are suitable for operation of motors ranging from 0.5 HP to 500 HP capacity. Motor control center contains various types of starting viz. Direct on line (DOL), Star-Delta, auto transformer, Soft starter etc. Local and remote operation facility, compatible to PCC / DCS based operation. Motor Control Center is properly ventilated in case of higher size of motor starter. Component layout is made so as to facilitate ease of operation and maintenance.

Specifications

  • Panel Enclosure Compartment Type as per customer require
  • Panel Supply 0.5 to 500 HP
  • All Motor Operating On Panel board and if Customer Require Remote Operation so priovde
  • All Motor Am separate
  • Voltage: 660 V
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Set
Get Best Quote
Product Details:
DimensionsAs per requirement
Electrical Assembly Panels are made of high-quality of raw material. This is mostly used for electrical industries. This is used for panel testing, wiring of connectors and blocking. This is very easy to install. This is very easy to use and producing high output of electricity. It is also used for consumes energy. It is very easy to maintain. It is very sturdy and corrosion resistant. It can be operate with a single phase. It also has electric starter panels.

Features:

  • Corrosion resistant
  • Easy to maintain
  • Isolators

Specifications:


  • Board Thickness: 1.6 mm
  • Min Line Width: 0.1 mm
  • Copper Thickness: 1 OZ, 35 um, 70 um, 140 um
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Pc_Onwards
Get Best Quote
Product Details:
SizeAs per requirement

We provide Low Tension Panels that are available in various specifications and configurations to meet the requirements of different industry applications. Available with us are LT Panels that are manufactured as draw-out as well as non draw-out type. These panels require system voltage of 440 V and have rated insulation voltage of 690 V.

 

Specifications:
ApplicationPower distribution
ConstructionFixed or modular type
Maximum rated currentUp to 8000 A, 65 kA
Ambient temperature50OC
Protection of degreeIP 65
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 50,000 / Unit
Get Best Quote
Product Details:
Minimum Order Quantity1 Unit
PhaseThree Phase
Powerup to 500 kw
IP RatingIP44, IP54, IP55
UsageGenerator, PLC Automation, Motor Control
Capacity (Amps)1000 amp

We offer a wide assortment of Motor Control Center Panels to our clients. This is made of best quality of raw material. This is used for distribute the electricity for different types of industries. It consumes low energy. It is very durable, reliable and acclaimed for its high efficiency. Grid breaker and trips DG breakers are automatically worked. It also has AC motor. This product has voltage and frequency in exact proportion. These products are fitted with air calculation devices.

Features:

AC motor ( DOL, STAR DELTA, SOFT STARTER, VFD)

Easy operation

Easy installation

 
Specifications:

Temperature: 5°C to 40°C

Frequency: 50 Hz

Power: UP TO 500 KW

Voltage : 415 VAC 3 PH  

Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Unit
Get Best Quote
Product Details:
Minimum Order Quantity1 Unit
UsageMotor Control, Submersible Pump
Powerup t0 300 hp
PhaseThree Phase
Capacity (Amps)500 amp
We are supplying a wide range of Auto Transfer Starter Panels. They are providing high quality and required low maintenance. We manufactured these products with high quality of raw material.They are very reliable and has compact design. This product is working for water supply. It's motor is required long acceleration time to provide starting torque. These are very easy to operate.

Features:

  • Blowers
  • Pumps
  • Compressor

ATS Starter Electric Control Panel
s:

  • Good starting torque and current performance possibility of adjusting starting parameters
  • Best suited when maximum reduction of inrush current is desired of motor require longer acceleration time with good starting torque
  • Application
  • Blowers
  • Pumps
  • Compressor
  • Extrudes
  • Crushers

Specifications:

  • Rated Voltage: 415 volt 3 PH
  • Panel Size : 1500 X 1000 X 300 With Siemens Grey Powder Caoting
  • Step Down Transformer 70%, 80 %, 90%
  • Fully Automatic and Manual
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Set
Get Best Quote
Product Details:
PowerVoltage : 440 V
Our range comprises Change Over Electrical Panels that find extensive application in mains and generator power changeover flexibility. These are available only in a fixed model that requires system voltage of 440 V and has rated insulated voltage of 690 V.

Specifications:

  • Volatge: 220 V-230 V
  • Dimensions: 96" x 96"
  • Measuring Range: 0-600 V
  • Frequency: 50 Hz
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Set
Get Best Quote
Product Details:
UsagePLC Automation
We are offering our customers Power Control Center Panels that are used to control the entire power supply. Fabricated using quality material, these panels meet the requirements of different industries such as refineries, chemical, automotive and engineering.

Specifications:

  • Protocol: Contact ID, TCP/IP
  • Frequency: 50 Hz
  • Working Voltage: 660 V
  • Capacity: up to 750 KVAr
  • Range: 250 KVA to 3000 KVA
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Pc_Onwards
Get Best Quote
We are specialized in offering a quality assured assortment of DG Synchronization Panel. The DG Synchronization Panel we offer is widely demanded amongst the clients for its wide use.
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 20,000 / Set
Get Best Quote
Product Details:
Power18.5~110 kw

We supply Electric Control Panels at very effective prices. It has lots of panel switches. These control panels are connected with starters and switches. This product has some logic controllers, which are widely used for automation industries. This machine has lots of quality parameters for proper working. It contains quality of ABB gears, which helps in power supply. Its capacitor provides series reactors that minimize the current.

Features:

  • Compact Construction
  • Easy to operate
  • High speed processor

 

Specifications:

  • Voltage: 380 V
  • Power: 18.5~110 kw
  • Size: L 24.1 x W 17.3 x H 5.2
  • Use: Machine Tool
Yes! I am interested
X
 

Download Brochure
Vishwakarma Electric Industries

Hitesh (Proprietor)
Plot No. 2012, Phase III, GIDC, Vatva
Vatva, GIDC, Ahmedabad - 382445
Gujarat, India
Send Email
© Vishwakarma Electric Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited